|
Since 1966, most
of the United States has observed Daylight Savings Time from 2:00 a.m.
on the first Sunday of April to 2:00 a.m. on the last Sunday of October.
Beginning in 2007, most of the U.S. will begin Daylight Savings Time at
2:00 a.m. on the second Sunday in March and revert to standard time on
the first Sunday in November.
NEC has made available a number of upgrade options that
addresses this federally mandated change. To take advantage of these upgrades,
please contact us at 570-451-1180 x130 or sales@midatl.com.
The following instructions will allow you to manually change
the time on Key Systems and their related Voice Mail Platforms. Please
note that PBX and Elite 48/192 customers require an upgrade
to provide Automatic DST Switching. Electra Elite IPK systems will switch
time on the original DST schedule without an upgrade. A field technician
can implement a simple programming change on Electra Elite IPK II systems
to adjust to the new schedule.
| |
Changing the
Time and Date on the Elite 48/192 and Electra Elite IPK Telephone
Systems.
- Locate Extension 100 or 101 (Must be a display phone). If extensions
100 or 101 do not exist, press the Feature key
followed by the digit 3 on the dial pad. Once
Port 01 or 02 has been located, either of these two terminals
can be used to change the system time and date.
- Once the correct telephone has been located perform the following.
A. Press the Feature key.
B. Press the digit 9 on the dial pad.
C. Press the # key
- The current time will be displayed and the cursor will be flashing
under the first digit in the hour field. Use the dial pad to enter
the correct time, use the Recall key to toggle
between AM/PM. To change the date, proceed
to step 5, otherwise press the Feature key to exit programming.
- The time is now current for the entire system.
- After entering the correct time press the Hold key. Use the
Recall key to toggle between days of the week
and months of the year, use the dial pad to change the day of
the month and the year. Use the # and *
key to move the cursor to the field that needs to be changed.
- When all required fields have been set, press the Feature
key.
|
| |
Changing the
Time on the Electra Elite IPK II Telephone Systems.
- Press the Speaker Key
- Dial 728
- Dial the two digits for the hour (24 hour clock; 13 = 1:00PM)
- Dial two digits for the minutes (00~59)
- Press the Speaker key to exit programming
|
| |
Changing the
Time on EliteMail CMS/FMS/VMS.
For designated system manager; accessed through personal
voice mail box on a display phone that supports SoftKeys:
- Press the Message Key or Dial 200
(your voice mail pilot may be different)
- Enter your security code
- Press the Soft Key under MORE
- Press the Soft Key under MGR
- Press the Soft Key under SCHED
- Follow prompts to change time settings via the dial pad.
For designated system manager; accessed through personal
voice mail box on a phone that does NOT support SoftKeys:
- Press the Message Key or Dial 200
(your voice mail pilot may be different)
- Enter your security code
- Listen to prompts (enter 1 for ‘yes’ or 2 for ‘no’)
- Press 1 for ‘yes’ when you hear the prompt “
Would you like to access system manager options?”
- Listen to the prompts
- Press 1 for ‘yes’ when you hear the prompt “Would
you like to change the system schedule?”
- Follow prompts to change time settings via the dial pad.
|
|
